===========================Spec in Config File==============================
  1.Entone Basic Information
      STB Info: num=26, enum=13, model=202-104 (B2-104)
      Hardware Model = 26 (Kamai500)
  2.Remote Information
      Has RF remote = 0
      Has IR remote = 1
  3.Standby Mcu Information
        This model (26) do not have MCU
  4.Clock Display Information
        This model (26) do not have Clock Display.
  5.Touch Panel Information
        This model (26) do not have Touch Panel.
  6.Indication LED (LINK/HD/REC) Information
        This model (26) do not have Indication LED.
        This model (26) does not have 7-segment MCU
  7.Power LED (RED/BLUE) Information
      Has Power LED = 1
        RED led gpio/type (Active Low) = 11/4 (1)
        BLUE led gpio/type (Active Low) = 6/4 (0)
        POWER_LED_ONOFF gpio/type (Active Low) = -1/0 (0)
  8.Power Button Information
        This model (26) does not have Power Button.
  9.Reset Hole Information
        Has Reset Hole = 1
        Reset Hole gpio/type (Active Low) = 79/0(Standard) (1)
        Reset Hole response now: 0
  10. WPS Button Information
        Has WPS Button = 0
        This model (26) do not has WPS button.
  11.Fan Information
        This model (26) does not have Fan.
  12.RF Output Select Pin Information
        This model (26) does not have RF Output Channel Select Pin.
  13.External Antenna Power Information
        This model (26) does not have External Antenna Power.
  14.Standby Information
      Standby Disabled
      Wake-on-GPIO Disabled
  15.Number to AON input GPIO to control: 0
============================================================================